Part Number Hot Search : 
300SB 1HSXXX BU4216G TB0500A NTE30 ANTXV2 30CTQ035 DS1265Y
Product Description
Full Text Search
 

To Download MX8330 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 INDEX PRELIMINARY
MX8330
RAMBUS CLOCK GENERATOR
FEATURES
* Clock generator for RambusTM Channel * Provide output frequency select pin * Provide a Rambus interface level output frequency which is 14 or 17 times of input frequency * Provide a TTL interface level output frequency which is input frequency divided by 4 * Provide a TTL interface level output frequency which is 14/5 or 17/5 times of input frequency * 3.3 V power supply * Package 8-pin SOP (150mil)
GENERAL DESCRIPTION
The product is a clock synthesizer chip for Rambus Channel. It uses advanced Phase lock loop technology to generate three desired clock. The reference clock is supplied by external crystal.The crystal frequency is 4 x 3.579545 MHz in NTSC case, and is 4 x 4.43361875 MHz in PAL case. The output clock (FSO) is 243.40906 MHz and 248.28265 MHz respectively. The FSO clock interface level has to be Rambus interface compatible. Beside FSO clock, a FSO divided by five clock output is also provided.The FSO/5 clock output is TTL compatible. The product is 3.3 V operation, and the package type is 8-pin SOP.
PIN CONFIGURATIONS
8-PIN SOP
FSO/5 GND FSO VDD
1
MX8330
8 7 6 5
FSC FSEL OSCIN OSCOUT
2 3 4
Rambus and
are trademarks of Rambus Inc.
P/N: PM0274
REV. 2.6, FEB. 27, 1996
1
INDEX
MX8330
PIN DESCRIPTION
SYMBOL FSO/5 GND FSO VDD OSCOUT OSCIN FSEL O I I O PIN TYPE O PIN NUMBER 1 2 3 4 5 6 7 DESCRIPTION Clock output. FSO divided by 5. Ground Rambus clock output. Rambus interface level. Power supply Crystal pin Crystal pin Frequency select pin(High:FSO=17*4*FSC,
Low:FSO=14*4*FSC). Toggling of FSEL will reset the counter in the FEEDBACK DIVIDER. FSC O 8 Clock output. Crystal frequency divided by 4.
BLOCK DIAGRAM
FSEL
FEEDBACK DIVIDER
OSCIN OSCOUT
OSC
PFC
CHARGE PUMP & LF
VCO
FSO
/5 LOOP FILTER
FSO/5
/4
FSC
FUNCTIONAL DESCRIPTION
The Rambus clock generator is an integrated circuit of phase locked loop frequency synthesizer.It provides three clock outpot frequencies. The first output frequency (FSC) is the crystal frequency divided by 4 clock. The second output frequency (FSO) is 14 or 17 times of crystal frequency. The FSO output frequency can be selected by FSEL Pin. When FSEL pin is high, FSO is 17 times of crystal frequency. When FSEL is low, FSO is 14 times of crystal frequency. FSO is Rambus interface level output. The third output frequency is FSO divided by 5 clock output. As shown in the block diagram, a Phase locked loop consists of feedback divider, phase frequency comparator(PFC), Charge pump, voltage controlled osillator(VCO), and loop filter. All components for PLL are integrated inside the chip. Note:Application notice for Rev.E of the MX8330. Because the VCO and the counter in the FEEDBACK
2
DIVIDER can not operate in accordance with each other in the initial stage. If the power on voltage is less than 3.3V the counter in the FEEDBACK DIVIDER must be reseted. The counter in the FEEDBACK DIVIDER can be reset by toggling the FSEL after VDD exceed 3.0V. It takes 5ms for FSO to be stable after FSEL's toggling.
FREQUENCY TABLE( in MHz)
(in NTSC case) CRYSTAL
4*3.579545 4*3.579545
FSEL
1 0
FSC
3.579545 3.579545
FSO
17*4*3.579545 14*4*3.579545
(in PAL case) CRYSTAL
4*4.43361875 4*4.43361875
FSEL
1 0
FSC
FSO
4.43361875 17*4*4.43361875 4.43361875 14*4*4.43361875
INDEX
MX8330
ABSOLUTE MAXIMUM RATINGS
RATING Storage Temperature Applied Input Voltage Applied Output Voltage Supply Voltage Operating Temperature Power Dissipation VALUE -85oC to 150oC -0.5V to VDD + 0.5V -0.5V to VDD + 0.5V -0.5V to 5V 0 to 70oC 0.5Watts NOTICE: Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended period may affect reliability. NOTICE: Specifications contained within the following tables are subject to change.
DC CHARACTERISTICS TA = 0oC to 80oC, VDD = 3.15V to 3.6V
SYMBOL VIL VIH IIL IIH IVDD VOL VOH CI RL VLT IOH IOL Ro PARAMETER Input Low Voltage Input High Voltage Input Low Current Input High Current VDD Current Output Low Voltage Output High Voltage Input Capacitance Line Impedence Line Termination Voltage Output High Current Output Low Current Output Resistance 20 2.2 -10 40 5.3 175 85 50 8 350 175 50 2.4 10 75 2.7 10 75 10 525 260 20 30 2.4 -5 5 40 0.4 MIN. TYP. MAX. 0.8 UNIT V V uA uA mA V V pF Ohm V uA mA Ohm Ohm Ohm Rambus Level, see note 1 Rambus Level, see note 1 FSO output VOL=0.4V, FSO output FSO output IOH=-600uA, FSC output IOL=600uA, FSC output IOL=8mA, FSO/5 output IOH=-4mA, FSO/5 output CONDITIONS
Ro (PMOS) Output Resistance Ro (NMOS) Output Resistance
AC CHARACTERISTICS TA = 0oC to 80oC, VDD = 3.15V to 3.6V
SYMBOL Dt1 Dt2 J Tr/Tf Tr/Tf Tup PARAMETER Duty Cycle Duty Cycle Jitter,short term Rise/Fall Time Rise/Fall Time Power up Time 0.3 2 3.5 1 MIN. 45 55 59 TYP. MAX. 55 62 150 0.7 5 5 UNIT % % ps ns ns ms Rambus level, FSO output FSO/5 output, 30 pF load 1. After power is stable 2. Frequency from 0 to 250 MHz Note1: Defined by customer's system implementation CONDITIONS FSO, FSC FSO/5 for Rev.E
3
INDEX
MX8330
ORDERING INFORMATION
PART NO.
MX8330MC
PACKAGE
8-PIN SOP
PACKAGE INFORMATION
8-PIN PLASTIC SOP (150 mil)
8
5
ITEM A B C D E F G H I J K L
MILLIMETER 4.95 MAX. .53 [REF] 1.27 [TP] .41 [TYP.] .10 MIN. 1.73 MAX. 1.45 .13 5.99 .3 3.91 .13 1.02 .20 [TYP.] .76
INCHES .195 MAX. .021 [REF] .050 [TP] .016 [TYP.] .004 MIN. .068 MAX. .057 .005 .236 .012 .154 .005 .040 .008 [TYP.] .030
1
4
A H I J
NOTE:Each lead centerline is located within .25 mm[.01 inch] of its true position [TP] at maximum material condition.
G
F K
D
C
B
E
L
4
INDEX
MX8330
MACRONIX INTERNATIONAL CO., LTD
HEADQUARTERS :
TEL : +886-3-578-8888 FAX : +886-3-578-8887
EUROPE OFFICE :
TEL : +32-2-456-8020 FAX : +32-2-456-8021
JAPAN OFFICE :
TEL : +81-44-246-9100 FAX : +81-44-246-9105
SINGAPORE OFFICE :
TEL : +65-747-2309 FAX : +65-748-4090
TAIPEI OFFICE :
TEL : +886-2-2509-3300 FAX : +886-2-2509-2200
MACRONIX AMERICA INC.
TEL : +1-408-453-8088 FAX : +1-408-453-8488
CHICAGO OFFICE :
TEL : +1-847-963-1900 FAX : +1-847-963-1909
http : //www.macronix.com
MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.
5


▲Up To Search▲   

 
Price & Availability of MX8330

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X